For 24/7/365 technical support contact OMNi 303.925.1708

2WCom MM08E DVB Audio IP / ASI Encoder
  • 2WCom MM08E DVB Audio IP / ASI Encoder
  • 2WCom MM08E DVB Audio IP / ASI Encoder

2WCom MM08E DVB Audio IP / ASI Encoder

SKU : ENC-N001-MM08E

2WCom's MM08E DVB Audio IP / ASI Encoder is an ultra-configurable multi-format piece of equipment designed to go above and beyond the end-of-life AZ110 out in the field allowing you to send and monitor audio over IP.
The MM08E is built to order in Germany.

The MM08E can include up to 8 channels, Livewire + AES67, hot swap power supplies, and more. This email address is being protected from spambots. You need JavaScript enabled to view it.

Stereo Encoder (1-4 analogue/digital, > 5-8 only digital)

· Encoder algorithms:

- Standard: MPEG 1/2 Layer 1, 2 and 3, G.711, G.722 and


- Optional: MPEG 2/4 AAC-LC, HEv1, HEv2, AAC-LD, E-aptX

· 3 IP-ports (2x data, 1x config.)

· RS.232 or IP-Input to feed in 8 UECP/RDS data streams

· 2 optional transport streams for ancillary data per audio


· Transport of UECP data either embedded (Layer 2 only) or

using breakout cable with separated PID (Data Piping)

· Supported protocols: RTP/RTCP/UDP, IGMP, ICMP, DHCP,

HTTP, FTP, SNMPv2c, NTP, TCP (Icecast), PTPv2

· 8 opto coupler inputs

· Audio inputs:

- Up to 4 inputs: analogue or digital audio connectors (XLR)

- Above 4 to 8 inputs: only digital audio connectors (XLR)

The activation setup can be carried out via web interface

· Generation of all mandatory DVB tables (ETSI EN 300 468)

· Output Interface: MPEG-2 transport stream on IP or ASI and

alternatively on elementary stream (RTP/UDP)

· Separate Ethernet interfaces for audio data, serial data and

GPIO transmission, controlling and setup functions.

· 19"-cabinet for rack mount of 1 height unit, 1 power supply

230 VAC included

· Management via web interface.


· 2wcom SIRC support

· 2wcom FEC: Pro MPEG FEC (Practice #3 release 2)